Sale!

DTech FTDI USB to TTL Serial 3.3V

50 Riyal

DTech FTDI USB to TTL Serial 3.3V is available in Saudi Arabia.

  • Find out all you need to know about DTech FTDI USB to TTL Serial 3.3V before buying : Price, Test video, Datasheet, Similar products.

Description

DTech FTDI USB to TTL Serial 3.3V – Features & Prices in Saudi Arabia :

DTech FTDI USB to TTL Serial 3.3V Adapter Cable TX RX Signal 3 Pin 0.1 inch Pitch Female Socket FT232RL Chip Windows 11 10 8 7 Linux MAC OS (6ft, Black)

Brand
DTech
Connector Type
USB Type A
Cable Type
USB
Compatible Devices
Computer, Laptop, Raspberry Pi, calculator, MBP, router, microphone, industrial controls, test equipment and instrumentation, consumer electronics, synthesizers, machine tool numerical controls, printers and video display terminals
Special Feature
FTDI chip, Low Voltage
Recommended Uses For Product
Indoor
Color
Black
Connector Gender
Male-to-Female
Unit Count
1 Count
Connectivity Technology
USB
Model Name
FTDI chip USB to TTL adapter 3.3V
Specification Met
ISO
Indoor/Outdoor Usage
Indoor
Package Dimensions
7.2 x 6.93 x 0.43 inches
Item Weight
1.76 ounces
Manufacturer
Guangzhou DTECH Electronics Technology Co.,Ltd
ASIN
B07RBKCW3S
Country of Origin
China
Item model number
DT-6552
Is Discontinued By Manufacturer
No
Date First Available
May 10, 2019

 

Test video – DTech FTDI USB to TTL Serial 3.3V :

 

 

 

Product highlights :

  • 6 ft USB to TTL serial adapter (with 3 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
  • 6 feet FTDI USB to TTL serial cable (3 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx and GND
  • FTDI chipset on the PCB board has configurable internal EEPROM and 3.3V UART signals can be individually inverted by configuring the EEPROM
  • 3V3 TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.
  •  

     

    Questions & Answers – DTech FTDI USB to TTL Serial 3.3V :

    ➕ What is the price of DTech FTDI USB to TTL Serial 3.3V in Saudi Arabia ?

    The price of DTech FTDI USB to TTL Serial 3.3V in-store is 50 SAR VAT.

    ➕ When DTech FTDI USB to TTL Serial 3.3V was released ?

    The release date was May 10, 2019.

    ➕ What is the price of DTech FTDI USB to TTL Serial 3.3V cheap used ?

    The price of DTech FTDI USB to TTL Serial 3.3V used is 40 SAR VAT.

    ➕ What are the main characteristics of DTech FTDI USB to TTL Serial 3.3V ?

    Special specifications :
  • 6 ft USB to TTL serial adapter (with 3 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port
  • ➕ Is it interesting to buy this product ?

    The best people who can answer you are customers who have already bought and tested this product (See Customer Reviews). This product is rated 4.2 / 5 on Amazon.

    ➕ Where to buy DTech FTDI USB to TTL Serial 3.3V in Saudi Arabia ?

    Mall, Supermarkets, Amazon, Specialized stores, ….

     

    Technical specifications – DTech FTDI USB to TTL Serial 3.3V :

     

    Brand
    DTech
    Connector Type
    USB Type A
    Cable Type
    USB
    Compatible Devices
    ,
    Special Feature
    FTDI chip, Low Voltage

     

     

    Purchase advice :

    • Warranty :

      Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?

    • Shipping :

      Is delivery offered? And how long does it take to get delivered (Delivery time)

    • Proof of purchase :

      Does the shop give you an invoice ?

    • After-sales service :

      Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.

     

    _____________________________

     

     

    2 reviews for DTech FTDI USB to TTL Serial 3.3V

    1. K. J (verified owner)

      Is as shown – Worked as expected, good product.

    2. A. K (verified owner)

      Worked great with Linux. No problems. – Worked great. No issues with Linux on Pi400.

    3. D. Z (verified owner)

      Just works with my MBP and MacOS – ust works with my MBP and MacOS

    4. J. J (verified owner)

      Works as expected – This works as expected. Plugged it in opened my terminal app, connected to my device, logged all my data. 5 stars.

    5. S. R (verified owner)

      Works for CASIO 9000G series calculators – I got this cable for connecting old CASIO calculators to a computer. I also bought a 2.5mm stereo connector and soldered to the cable. I tested the cable with two models of calculators: CFX-9800G and CFX-9850GB+. Both worked well. I found it difficult to obtain the original CASIO link cable and information on how it works scarce. Here is what I think might be important to use it. First, make sure the pins are soldered correctly. For the 2.5mm connector, the tip is receiving line and the ring sending line. Test first and then solder. I used a Window 7 laptop with FA-124 software. There is no need to install extra drivers. CFX-9800G needed to set the parity to NONE on the calculator. I also tried FA-121 on Windows 98SE. For sending the screen capture of a tri-color calculator, it needed to set the mode to Monochrome. Windows 7 with FA-124 is recommended. Other OSs may have driver issues.

    6. S. R (verified owner)

      Works for CASIO 9000G series calculators – I got this cable for connecting old CASIO calculators to a computer. I also bought a 2.5mm stereo connector and soldered to the cable. I tested the cable with two models of calculators: CFX-9800G and CFX-9850GB+. Both worked well. I found it difficult to obtain the original CASIO link cable and information on how it works scarce. Here is what I think might be important to use it. First, make sure the pins are soldered correctly. For the 2.5mm connector, the tip is receiving line and the ring sending line. Test first and then solder. I used a Window 7 laptop with FA-124 software. There is no need to install extra drivers. CFX-9800G needed to set the parity to NONE on the calculator. I also tried FA-121 on Windows 98SE. For sending the screen capture of a tri-color calculator, it needed to set the mode to Monochrome. Windows 7 with FA-124 is recommended. Other OSs may have driver issues.

    7. D. Z (verified owner)

      Just works with my MBP and MacOS – ust works with my MBP and MacOS

    8. C. E (verified owner)

      Labels for the leads would be nice but it works – Labels for the leads would be nice Yu but it works

    9. K. J (verified owner)

      Th TX pin goes to the RX pin on microcontroller. RX goes to the TX pin. Worked fine with Windows 11 – The TX pin goes to the RX pin on microcontroller. RX goes to the TX pin. Worked fine with Windows 11. Wish it came with male pins, but that was easy to fix with the extra length ordered.

    10. N. H (verified owner)

      Reliable at 115200 baud between RPi and MacOS/Linux/Windows – No driver required under Mac OS and Ubuntu. On Windows 10 I needed to download and install the FTDI VCP Driver.

    11. C. E (verified owner)

      Labels for the leads would be nice but it works – Labels for the leads would be nice Yu but it works

    12. N. H (verified owner)

      Reliable at 115200 baud between RPi and MacOS/Linux/Windows – No driver required under Mac OS and Ubuntu. On Windows 10 I needed to download and install the FTDI VCP Driver.

    13. J. J (verified owner)

      Works as expected – This works as expected. Plugged it in opened my terminal app, connected to my device, logged all my data. 5 stars.

    14. K. J (verified owner)

      Is as shown – Worked as expected, good product.

    15. K. J (verified owner)

      Th TX pin goes to the RX pin on microcontroller. RX goes to the TX pin. Worked fine with Windows 11 – The TX pin goes to the RX pin on microcontroller. RX goes to the TX pin. Worked fine with Windows 11. Wish it came with male pins, but that was easy to fix with the extra length ordered.

    16. A. K (verified owner)

      Worked great with Linux. No problems. – Worked great. No issues with Linux on Pi400.

    Add a review

    Your email address will not be published. Required fields are marked *